Radio Standard - Keysight N9912A User Manual

 Then

Radio Standard

A Radio Standard is a collection of settings that are applied to the FieldFox for
specific RF protocols. When a Radio Standard is applied, the FieldFox frequency and
channel settings change to that of the standard.
By default, the FieldFox locates the center frequency of the standard in the middle of
the screen and sets the frequency span to cover all of the Uplink and Downlink
frequencies. The selected Radio Standard name appears in the center of the screen
below the X-axis.
After a Radio Standard has been selected, the frequency range can be changed by
selecting channel numbers rather than frequency. Learn how on page 71.
When a Channel Measurement is selected such as ACPR, other relevant settings will
be changed such as Integration BW. Learn more about Radio Standards and Channel
Measurements on page 93.
How to select a Radio Standard
 Press Measure 1 OR Freq/Dist then
 Then
 Then select a standard using the ▲|▼ arrows or rotary knob and press Enter.
Custom Radio Standards
Beginning with Rev A.05.50, your own custom Radio Standards can be imported into
the FieldFox. Custom standards are created in *.csv (spreadsheet) format.
A template and instructions for creating your custom Radio Standard is at:
http://na.support.keysight.com/fieldfox/help/SupHelp/Reference/CustomRadioStan
dard.htm
Once imported, the *.csv file is stored in the FieldFox \User Data\ folder. The custom
Radio Standards are read and presented at the top of the list of internal Radio
Standards.
How to Import and Delete a Custom Radio Standard
First, press Save/Recall and select the
be read. Most likely this will be USB or SD Card.
 Press Measure 1 OR Freq/Dist then
 Then
 Then
 Then select the *.csv file using the ▲|▼ arrows or rotary knob and press Enter.
 Custom Radio Standards can be removed from the FieldFox by selecting Measure
70
CF Step Auto Man
Each press of the ▲|▼ arrows increments or decrements the value by
Auto
o
1/10 (one division) of the current frequency span. Note: To change this setting
th
from Man to Auto, press CF Step twice.
Type a step size value using the numeric keypad, then select a multiplier
Man
o
key. Learn about multiplier abbreviations on page 19.
Radio Standard
Radio Standard
Import Radio Standards
1 then
Radio Standard
More
from which the Radio Standard will
Device
More
then
Delete Radio Standard.
FieldFox User's Guide