Hydraulik Settings; Figure 60 Hydraulic Settings - Leibinger JET3 Series Operating Manual

Page 146

7.3.2 Hydraulik settings

Figure 60 Hydraulic settings
1
3
4
5
6
7
8
9
10
11
12
1 – Drop-down menu <Settings>
2 – Option <Hydraulic settings>
3 – Dialog box <Hydraulic settings>
4 – Input field <Pressure [mbar]>
5 – Input field <Suction pump [%]>
6 – Input field <Visco correction>
7 – Input field <Fall time [msec]>
8 – Input field <Nozzle [µ]> size
Warning
All settings in the <Hydraulic> menu have a direct impact on the functionality
of the printer!
Wrong or inappropriate settings may cause the printer to stop the work
and /or may lead to hardware damages!
All values were set at factory for an optimal operation. Changes must only be
carried out by LEIBINGER service technicians or staff trained by LEIBINGER
service technicians.
Release 2.02
Job Editor
9 – Input field <Oscillator Voltage [V]>
10 – Input field <Ink number>
11 – Input field <Solvent number>
12 – Input field <Frequency [kHz]>
13 – Indicators for current values
14 – Spin buttons for settings
15 – Drop-down list <Ink number>
16 – Drop-down list <Frequencies>
Group 8
2
13
14
15
16
JET3 Series