Selection Of A User; Definition Of Password; Figure 66 Selection Of Users - Leibinger JET3 Series Operating Manual
Hide thumbs
Also See for JET3 Series:
- Operating manual (378 pages) ,
- User manual (233 pages) ,
- Service manual (6 pages)
Table of Contents
Advertisement
Group 8
7.3.5.1.1 Selection of a user
With the drop-down list <User> (1) a user is selected.
Figure 66
Selection of users
1 – Drop-down list <User>
7.3.5.1.2 Definition of password
The password for the currently selected user can be enterd in the input field
<Password> (1). A password already set will displayed in the input filed and can be
overwritten if necessary.
Proceeding:
Example: The password „Leibinger" shall be defined for user 1.
Click in the input field <Password> (1). A keyboard (3) pops up for input.
You will find further information regarding the operation with keyboard in
the chapter 6.4.1 Keyboard
Enter the password „Leibinger". The input is displayed in the input field <Password>
(1).
Press the button <Enter> (4) of the keyboard field to finish the input.
Now press the button <set...> (2) to take over the entered password.
In order to complete the setting of the password the dialog box has to be
closed with the <OK>button (5)!
In order to discard all changes close the dialog box with a click on the
<Cancel> button (6).
JET3 Series
Job Editor
1
INFORMATION
ATTENTION
Page 155
Release 2.02
Advertisement
Table of Contents
