Pressure Regulator Valve; Figure 187 Replacement Of The Battery - Leibinger JET3 Series Operating Manual
Hide thumbs
Also See for JET3 Series:
- Operating manual (378 pages) ,
- User manual (233 pages) ,
- Service manual (6 pages)
Table of Contents
Advertisement
Page 372
Safety- and disposal instructions
1.
Please only replace with the same battery or with a comparable
type of battery according to the recommendation of the
manufacturer!
2.
Pay attention to the correct polarity (+/-)!
3.
Do not throw battery into fire!
4.
Do not load battery again!
5.
Do not use conductive tools to change the battery!
6.
Do not open battery!
7.
Do not dispose battery in the household garbage!
Figure 187
Replacement of the battery
1 – Battery, lithium, 3 VDC (E55-005320K)
10.1.7.2 Pressure regulator valve
This pressure regulator valve is part of the external print head ventilation which is
available as an option.
Resulting condensate must be emptied at regular intervals and the cartridge cleaned.
Release 2.02
Setting-up/Maintenance
2
Group 10
Danger of
explosion
Danger of
short circuit
1
2 – Safety indication
JET3 Series
Advertisement
Table of Contents
