Leibinger JET3 Series Operating Manual page 144
Hide thumbs
Also See for JET3 Series:
- Operating manual (378 pages) ,
- User manual (233 pages) ,
- Service manual (6 pages)
Table of Contents
Advertisement
Page 142
Remote Control - Settings
With the VNC server running (indicated in the main window) it is possible to access the
VNC server with a VNC client running on an external device like a desktop PC, a notebook
or a tablet computer. In order to establish a connection between a VNC client and the
VNC server of the Printer printer the following settings are required:
The VNC server on the Printer printer must be started
The IP address of the Printer printer has to be adjusted to the network the VNC
client is running on.
For a successful connection the password set for the VNC server of the Printer
printer is required.
Example
Proceeding:
1. Set the IP adress and subnet mask of the Printer printer. All other settings in the
IP Adress dialogbox are not relevant for the setup of VNC connection. The settings
depend on the network into which the printer has to be implemeted.
2. Connect a WiFi router to the Printer. There is ethernet cable for the M12D coded
socket of the Printer required.
3. Please see the manual of the router for details about the settings. In this
example the router is set to the following IP-Adress: 192.168.1.1. The VNC server
of the Printer printer uses port 5900.
4. Connect the external device on which the VNC client software is installed either
by cable or WiFI to the router.
5. Start the VNC client on the external device and enter the required settings. The
required settings depend on the VNC client used. Please the the VNC client's
manual for details. With the correct settings a connection to the Printer printer can
be established. The display of the Printer will be mirrored on the VNC client
software and the printer can be operated from the external device.
6. It is possible to add more than one WIFI device like e.g. laptops, Android/Apple
tablets /phones to the WIFI net of the router in order to access the Printer printer.
Make sure that there is a VNC client like Real VNC, Ultra VNC (Windows OS) or
screens VNC (IOS) installed on the device. For Android devices you can use
bVNC or Real VNC.
7. You can als make a cable connection to the router. The number of cable
connections depends on the type of router used. Cable connections may be used
e.g. to connect a desktop PC. In that case you have to make sure that the LAN
adapter of the PC is set to the correct address space!
Release 2.02
Job Editor
Group 8
JET3 Series
Advertisement
Table of Contents
