Job Editor - File Management; Save Job/Save Job As - Leibinger JET3 Series Operating Manual

Group 8
8.3 Job editor – File management
In the job management the following submenus are available:
 Save Job
 Load Job to print

8.3.1 Save job/Save job as

With the option <Save Job>, a job which opened for editing is saved under the current
name.
With the option <Save Job as>, a job which opened for editing or a new created job can
be saved under a new or particular name.
There will be no confirmation prompt if a job is saved under an already
existing file name An already existing file will be overwritten without any
further notice.
Proceeding:
 Press the button <Job> (1) and the option <Save Job as> (2).
 The window <Save Job> (3) is faded in.
 The names of the already existing graphics are displayed in the data file selection
field (4). With the drop-down list <Search in> (5) you can select the different
memory devices.
 Click in the display <Filename> (6). A keyboard field (7) opens for input.
 Enter the requested name.
 Press the button <Enter> (8) of the keyboard field. The entered name is taken over
to the display <name> (6).
 Press the button <Save> (9) to finish the saving process or press the button <Cancel>
(10) to abort the process.
JET3 Series
 Save Job as
ATTENTION
INFORMATION
You will find further information regarding the operation with keyboard
in chapter 6.4.2 Keyboard
Job Editor Page 237
 Close Editor
Release 2.02