Interface X2 - Serial Interface - Leibinger JET3 Series Operating Manual

Page 60

5.5.6 Interface X2 - Serial interface

The interface "X2" is a serial data interface with a transfer rate up to 115200 Baud. The
access is suitable for a connection to the printer to application-specific software for the
data management and for the remote control of the printer.
Plug assignment:
The function allocations of the outputs is carried out with the software of
the printer in the menu
Settings  I/O-Settings  Outputs.
You will find a circuit diagram of the interface in the manual appendix!
Release 2.02
Transport/Start up
Pin connection:
Pin Designation
1 NC
2 RxD
3 TxD
4 Connected with 6
5 GND
NC = not connected
INFORMATION
Pin Designation
6 Connected with 4
7 RTS
8 CTS
9 NC
JET3 Series
Group 5