Basic Settings; Figure 41 - Menu Basic Settings - Leibinger JET3 Series Operating Manual

Group 8

7.3.1 Basic settings

The drop-down menu <Settings> (1) in the menu bar of the main window offers the option
<Basic Settings> (2). This opens a dialog box (3) whith a tab bar (4). The available basic
settings are grouped by tabs. The following tabs are available:
 Language/Unit (Measurement)
 Date/Time
 Interval function
 Encoder interface
A tab is selected by clicking on its caption. Use the arrow buttons (5) for shifting the tab
bar horizontally in order to see all available functions.
Note: The software is based on common Windows™-standards.
With the <OK> button (7) all settings and chages are saved and the dialog box will be
closed.
Figure 41 Dialog box basic settings
1 – Drop-down menu <Settings>
2 – Option <Basic Settings>
3 – Dialog box <Basic Settings>
4 – Tab bar with tab captions
JET3 Series
Job Editor
 Factory Settings
 IP-address
 Netzwerk ID
 Contact details
1
2
5
4
3
6
7
5 – Arrow key for shifting tab bar
6 – Button <Cancel>
7 – Button <OK>
Page 119
 Solvent Saving Mode
 Remote screen
 Error config
Release 2.02
5