Figure 28 Assembly Of The External Print Head Ventilation - Leibinger JET3 Series Operating Manual

Group 8
Figure 28 Assembly of the external print head ventilation
Outside
Inside
5
Connection diagram:
1 – rear panel of the housing
2 – pressure regulator valve
2.1 – adjusting knob
2.2 – manometer
2.3 – Condensate container (cartridge)
JET3 Series
1
2
1,4 Bar
60 l/h
Job Editor
3
4
Both of the throttle valves are adjusted
exactly and should not be changed!
60 l/h
3 – Supply air hose
4 – Throttle valve for the head ventilation
5 – Throttle valve for the housing ventil.
6 – Hose for the print head ventilation
7 – Hose for the housing ventilation
Page 85
2.3
6
Release 2.02
2.1
2.2
7