Interfaces; Figure 13 - Interfaces - Leibinger JET3 Series Operating Manual

Group 5
 Make sure that there is a permanent compressed air supply!
 The printer doesn't monitor the permanent compressed air
 There will be no warning in case the permanent compressed air
 Operation is only permissible with dry, oil-free and filtered

5.5 Interfaces

The following interfaces are available on the rear side of the electronics cabinet.
Figure 13 Interfaces
Interfaces
1
1 – Electronic cabinet
2 – Interface X5 – PrintGo
3 – Interface X1 – Encoder
4 – Interface X4 – digital inputs
JET3 Series
Transport/Start up
ATTENTION
supply!
supply fails!
compressed air (Filtering 8 m) The use of otherwise prepared
compressed air can lead to damage and malfunctions!
8
7
6
5
4
3
2
5 – Interface X3 – digital outputs
6 – Interface X2 – Serial Interface
7 – Ethernet-connection
8 – USB connection
Page 53
Release 2.02