Group 8
Open a dialog box and enter settings
(Example: Enter settings within the tab „PrintGo Parameter")
Proceeding:
Open the drop-down menu <Settings> (1) and select <Print Parameter> (2)
This opens the <Job Settings> dialog box (3).
The dialog box <Job Settings> has a tab with 4 tabs (4). Respectively the parameter
settings are separated in 4 groups: <Print style>, <PrintGo Parameter>, <Encoder
Parameter>, <Date change parameter>. A tab is selected by pressing the caption
(5). In this example the <PrintGo Parameter> tab is selected.
Options are activated using check boxes (6).
Parameters are entered into display fields (8). Inputs or changes can either be made
by using the arrow keys (7) or a numeric keypad (9).
The chapter 6.4.1 Numeric keypad describes further details regarding this
input method.
Pressing the <Cancel> button (11) discards all changes and closes the dialog box.
Pressing the <OK> button (10) confirms and saves all settings and changes and
closes the dialog box.
The chapter 8.5 Job settings describes further details about the content of
all tabs of the <Job Settings> dialog box.
JET3 Series
Job Editor
INFORMATION
INFORMATION
Page 235
Release 2.02