Page 310
Point 3
Now change to the <Date/Time>.
Press the following buttons (10-13) to create the required date format input:
„Day" „/" „Month" „/" „Year 2014"
The display field <Content> (8) shows a preview of the date format.
Press the button <OK> (16) for confirmation and to close the tab or press the button
<Cancel> (15) to leave the tab without saving.
With the confirmation the date object is inserted into the editing window of the <Job
editor> marked with a red object frame.
Click on an object to select it. A selected object is marked with a red frame.
Point 4
Position the date object with the direction buttons of the job editor or use the drag-
and-drop function to move the element.
Approach (part 2) refers to Figure 167
Point 1
Press the menu item <Insert> (1) and in the drop down menu select the menu item
<Date/Time> (2) or the appropriate direct button (3).
Point 2
The menu <Global Settings (Date/Time)> is faded in. Carry out the requested
settings for the font parameters and display options on the <Global Settings> tab.
You will find further information in the chapter 8.4 Object settings
Point 3
Now change to the <Date/Time> tab by selecting the corresponding tab caption.
Press the following buttons (10-13) in the appropriate order to create the required date
input:
„Day" „/" „Month" „/" „Year 2014"
The display field <Content> (8) shows a preview of the formatting.
Select "days" from the drop-down menu of the <Expiry Date Offset> section (17).
Release 2.02
Job Editor
INFORMATION
Group 8
JET3 Series