Figure 59 Error Config - Leibinger JET3 Series Operating Manual

Group 8
Figure 59 Error config
1
3
4
8
10
Example settings on the
<Error Config> tab.
10
Example for a error message: After the last record of a data base was printed the
error message with code 1223 pops up and the digital output X3.1 switches.
10
Example for a warning message: After the end of a job list is reached the error
message with code 1221 pops up and the digital output X3.2 switches.
1 – Dialog box <Basic Settings>
2 – Tab <Error Config>
3 – Message code
4 – Message content
5 – Default setting <Error>
JET3 Series
Job Editor
10
Example settings on the <Outputs> tab
of the <I/O settings> dialog box.
Example Error Message
Example Warning Message
6 – Drop-down list message options
7 – Select option
8 – <OK> button
9 – <Cancel> button
10 – Examples
Page 145
2
5
6
7
9
Release 2.02