Figure 43 Set Measuring Unit - Leibinger JET3 Series Operating Manual

Group 8
Proceeding:
 Press on the tab <Language/Unit> (2) to select the tab.
 Press on the arrow key of the accordant drop-down list. The drop-down list opens
for selection.
 Now select the requested language or the requested keyboard font.
3. Measuring unit:
The two different measuring units „mm" and „inch" are available.
Figure 43 Set measuring unit
1
2
1 – Dialog box <Basic Settings>
2 – Tab <Language/Unit>
Proceeding:
 Press on the tab <Language/Unit> (2) to select the tab.
 Press on the arrow key of the drop-down list <Measuring unit> (3). The drop-down
list opens for selection.
 Now select the requested measuring unit.
JET3 Series
Job Editor
3 – Drop-down list <Measuring unit>
Page 121
3
Release 2.02