Load Existing Graphic; Figure 99 - Graphic Editor - Load File Dialog - Leibinger JET3 Series Operating Manual

Page 206

7.5.6.5 Load existing graphic

The menu item <Open> opens an <Open file> dialog box.
Figure 99 Graphic editor Open file dialog
1 – Drop down menu <File>
2 – Menu item <Open>
3 – <Open graphic file> dialog box
4 – File list <Graphic files>
5 – Drop-down list <Search in>
6 – Input field <Filename>
Proceeding:
 In the drop-down menu <File> (1) press the menu item <Open> (2).
 The dialog box <Open graphic file> (3) pops up.
 Select a graphic file from the <graphic file list> (4). The drop-down list <Search in>
(5) offers all available storage devices.
 The file name of the selected graphic is displayed in the input field <Filename> (6)
and a preview of the graphic is displayed below the file list (9).
 Press the <Open> button (10) to load the selected graphic file. With the <Cancel>
button (11) the dialog box will close without any changes.
Release 2.02
1
2
4
7
9
10
Job Editor
7 – Selected graphic file
8 – Selected storage device
9 – Preview of the selected graphic
10 – <Open> button
11 – <Cancel> button
Group 8
3
5
6
8
11
JET3 Series