Adjust the machine settings again:
Important information about ink and solvent
The default setting for the ink- and solvent parameters are specially
adjusted by Leibinger so that it is not necessary to TAG a new bottle for
solvent and ink after exchanging the main board.
The only thing what you have to do in regards of the ink- and solvent
parameter is to enter the correct ink- and solvent number in the
parameter settings how it is described in following chapter.
Connect the "USB – Stick" to the PC and open the directory „LJ3_Log"
1.
2. Open the specified file in a new window, print out this file and set the machine
settings.
Rev. 1.0
Service Manual JET3
195