Leibinger JET3 Series Operating Manual page 227

Group 8
Proceeding:
 Configure the <Network ID> of the printer in the <Basic settings> (1)
and/or
 Plug an USB-Stick into the USB-socket of the device (2).
 Press the button <Export> (3).
 If there is a <Network ID> configured and the network connection is established a
confirmation prompt will pop up asking whether the data shall be saved to the
network storage device (4). If this message is confirmed the information will be
stored on the network storage device. If the message is not confirmed (<No>
button) it is checked whether an USB stick is availabe. If no USB stick is avaibe a
respective message box pops up (5). With an USB stick inserted the information is
stored to the USB stick.
 When the data is saved on the connected medium a confirmation message pops up
(6).
 The message have to be confirmed with the <OK> button (7).
 The files are saved in a folder named PRINTER_Log. If this folder does not already
exist it will be created by the <Export> function.
JET3 Series
Job Editor Page 225
Release 2.02