Drawing Tools; Figure 97 Graphic Editor (Drawing Tools) - Leibinger JET3 Series Operating Manual

Page 204
7.5.6.3

Drawing tools

Figure 97 Graphic editor (Drawing tools)
The drop-down menu<Function> offers several graphic tools for editing and the selection
of graphic elements.
Note:
The function of the tools refers to Windows™ standard drawing tools.
Regardless of the grid, points are always created with a 1x1 size.
Lines, circles and rectangles are created with a grid width of 1.
Pos. Drawing tool
2 Selection
3 Dot
4 Line
5 Rectangle
6 Ellipse
7 Row
8 Column
Release 2.02
Job Editor
1
2
3
4
5
6
7
8
Function
For the selection of graphic elements
Creates or deletes a single point on the drawing area.
Creates a line defined by two points.
Creates a rectangle by two corner points
Creates an ellipse by two points
Creates a horizontal line with the total length of the
selected row of the grid.
Creates a vertical line with the total length of the selected
column of the grid.
1 – Drop-down menu <Function>
2 – <Selection> tool
3 – <Dot> tool
4 – <Line> tool
5 – <Rectangle> tool
6 – <Ellipse> tool
7 – <Row> tool
8 – <Column> tool
Group 8
JET3 Series