Group 8
The following system information are displayed in the window:
Oscillator frequency and nozzle size of the device (1)
The ink which has been filled in the device (2)
The solvent which has been filled in the device (3)
The nominal and actual values of the hydraulic system (4-12)
Several information about operation hours, ink consumption, number of prints an
service times (14-19)
With the button <Export> (13) you can save the system information in a network location
or on an USB-stick. The button <Close> (20) closes the dialog box.
Figure 111
Info dialog box – Page 2
1
2
3
4
5
6
7
8
9
1 – Current <System language>
2 – Software version
3 – <Serial number>
4 – <Controller Version>
5 – Revision number 1
6 – Revision number 2
7 – VRZ number
JET3 Series
Job Editor
8 – Hardware information
9 – <Export> of the <Info> data
10 – Network information
11 – Indicators for the drop break-off curve
12 – Illustration of the drop break-off curve
13 – <Close> button
Page 223
10
11
12
13
Release 2.02