I/O-Settings; Figure 61 Dialog Box I/O Settings - Leibinger JET3 Series Operating Manual

Page 148
7.3.3

I/O-settings

With the option <I/O Settings> (2) you can open the dialog box „I/O Settings" (3).
This dialog box shows the function or status assignment to the available digital inputs
and outputs.
6 inputs and 8 outputs are available.
The selection of the tab „Inputs" and „Outputs" happens by clicking on the accordant tab
(4).
Note: The proceeding corresponds to the Windows™-standard procedure.
With the button <OK> (5) you can close the dialog box and you can save the settings.
The button <Cancel> (6) closes the dialog box without taking over the carried out
changes.
Figure 61 Dialog box I/O Settings
1 – Drop-down menu <Settings>
2 – Option <I/O Settings>
3 – Dialog box <I/O Settings>
Release 2.02
1
2
Job Editor
4
4 – Tabs
5 – Button <OK>
6 – Button <Cancel>
Group 8
3
6
5
JET3 Series