Accident Prevention; Storage And Handling - Leibinger JET3 Series Operating Manual

Group 3

3 Accident prevention

The following presentation shows the measures in the event of an accident with ink and
solvent with the danger marking,

3.1 Storage and handling

GENERAL
STORAGE
HANDLING
JET3 Series
Accident prevention
These products must only used at points that are free from open
flames and other ignition sources. Do not use pressure for emptying –
the container is not a pressure vessel. Good household practice and
regular, safe removal of the waste materials restrict the danger of self-
ignition and other risks of fire to a minimum. The product can charge
statically. When pouring from one container to another use a mass
lead. The workers must wear anti-static shoes and clothing and the
floors must be conductive.
Observe the marking information. Store at 5 to 25°C in a well ventilated
location at a safe distance from heat and ignition sources and direct
sunlight.
Do not smoke! Do not grant access to unauthorised persons. Open
containers must be properly closed and stored upright in order to avoid
leakage.
Smoking, eating and drinking must be forbidden in the storage and
working areas. Always keep in containers from the same material as
the delivery containers.
The development of combustible or explosive vapour concen-trations
must be prevented and vapour concentrations avoided that are above
the threshold values of the employers liability insurance association.
Keep containers closed tightly.
Keep sources of heat and sparks as well as open flames well away.
Use only spark-free tools. Electrical devices must be protected in
accordance with the corresponding standard.
Avoid contact with the skin and eyes. Do not inhale vapours and spray
mist.
Previous warning labels
highly flammable irritant
Page 27
Release 2.02