Leibinger JET3 Series Operating Manual page 314

Page 312
Point 4
 Set the requested expiry date of 15 days. The setting can be carried out stepwise
with the arrow keys (18)
or
by clicking in the display field of the <Expiry Date Offset> section which will open a
number keypad (19) for input.
You will find further information about working with the number keypad in
the chapter 6.4.1 Numeric keypad
 Press the button <OK> (16) for confirmation and to close the tab or press the
<Cancel> button (15) to leave the tab without saving.
Point 5
 The expiry date object is inserted to the editing window of the <Job editor> marked
with a red object frame (20).
 You can select an object by clicking on it. A selected object is marked with a red frame.
 Position the object with the arrow keys of the job editor or use the drag-and-drop
function to move the object in its final position (21).
Release 2.02
Job Editor
INFORMATION
Group 8
JET3 Series