Create New Job Lists - Example „Batch Job - Leibinger JET3 Series Operating Manual

Group 8
7.2.5.3 Create new job lists – Example „Batch Job"
Task:
Five different print jobs shall be printed (JL-Job1 to JL-Job5). The print-out shall be carried
out in a fixed order. The print jobs shall be printed in the following order and with the
respective repetitions:
Print Print job
job no.
1 JL-Job1
2 JL-Job2
3 JL-Job3
4 JL-Job4
5 JL-Job5
Presets:
The described presets depend on the used hardware and may vary.
The print-out speed is measured with an external encoder with a resolution of 12.5
pulses/mm. The encoder shall only work clockwise and shall be locked against
backward movements. The speed dependent output shall not be used. The <PrintGo>
signal is provided from an external sensor and provides a positive edge. The <PrintGo
Gate> function shall not be used and the print-out shall not be stopped immediately
when a <PrintStop> signal occurs but the current print job shall be finished. The <Date
Change Parameter> option shall not be used.
It is assumed that the 5 different print jobs are already created. A <PrintGo delay>
(distance between <PrintGo> signal and start of the printout) cannot be defined in the
job list. A <PrintGo delay> has to be defined in each print job itself. The <PrintGo
delay> of each of the five print jobs of this example are listed in the table above.
Approach:
The numbers in brackets refer to the numbers in Figure 38
1. Open the <Batch Job> tab from the menu bar of the main window of the printer:
<Job>-<Create new Joblist>-<Batch> (1).
2. Push the <Import> button for adding the first print job to the list (2).
3. Select the first print job (2). The first column of the job list displays the print job
number, the second the numbers of repetitions and the third the print job names
(3)
4. Define the number of repetitions for the selected job (3).
5. Fill the job list display with the 4 remaining print jobs (4) and assign the required
repetitions to each job (4).
6. Enter the following settings in the <Joblist settings> (5-8):
JET3 Series
Job Editor
Number of printouts and
repetitions
1 printout, 0 repetitions
1 printout, 2 repetitions
1 printout, 1 repetitions
1 printout, 3 repetitions
1 printout, 0 repetitions
Total
<PrintGo delay> in
number of
[mm]. Defined in
printouts
each print job
1
3
2
4
1
Page 109
0
10
20
10
30
Release 2.02