Operation; Construction/Structure Of The Device; Figure 14 - Equipment Configuration/General View - Leibinger JET3 Series Operating Manual

Group 6

6 Operation

6.1 Construction/Structure of the device

The high-performance Leibinger JET3 series printers are manufactured of a solid two
parts stainless steel cabinet. Due to the two parts construction you will get a thermal
separation between the hydraulic- and electronic section. The device consists of the
following main components.
Figure 14 Equipment configuration (General view)
1 – Electronic cabinet
2 – TFT – Touch Display
3 – Hydraulic cabinet
In the closed electronic cabinet you will find the essential electronic components as power
supply, the TFT-Touch Display as well as the controller board.
The large central arranged TFT-Touch Display describes the interactive interface for the
operator. This central entry medium with its extensive 10,4" color display with backlight
allows a clear, self-explaining operator guidance without additional keys and switches.
In the hydraulic cabinet you find all components which are required for the
transportation and preparation of ink.
The refilling unit provides a supply of consumables. It contains two separate reservoir
tanks for ink and solvent. The unpressurized tanks can be refilled without interrupt
procedure, odorless and splash-free during the operation.
The print head contains all mechanical, electronical and hydraulic components which are
required for the creation of printout. It is connected with the hydraulic cabinet by a flexible
umbilical.
Release 2.02
Operation – Design and structure
1
4
2
5
4 – Refilling unit
5 – Print head with umbilical
3
Page 62
JET3 Series