Contrast Value; Figure 127 Object Settings - Contrast - Leibinger JET3 Series Operating Manual

Group 8
Available settings
Pos. Object settings
3 Printout contrast
ICG - Inter Character Gap
4
5 Bold printout
6 Printout inverted
7 Alternating printout
8 Proportional printout
9 Orientation and mirroring
11 Prompt field function
12 Print when counter=0
13 Assigned Counter ID

8.4.1 Contrast value

The setting determines the print contrast of the object. Allowed are values between 0 – 7.
The currently value set is shown in the respective input field.
In order to increase the contrast of a printout, dots were printed on top of each other.
Example 0 = no contrast increasing (single printout)
1 = 2 dots are placed on top of each other
2 = 3 dots are placed on top of each other
.....
7 = 8 dots are placed on top of each other
The value set is displayed in the respective input field.
Figure 127 Object settings – Contrast
JET3 Series
Job Editor
Note
Not available for barcodes and graphics
Not available for barcodes and graphics
Not available for barcodes and graphics
See separate description
See separate description
Not available for barcodes and graphics
See separate description
Not available for graphics
Object is assigned to a counter
Counter ID the object is assigned to
Printout:
Standard With contrast
Page 243
Release 2.02