Page 182
Proceeding
Click on the menu item <Extra> (1) and select the option <Test Print> (2) or click on
the accordant direct buttons (shortcut) (3).
A confirmation prompt (4), pops up
Confirm by pressing the <OK> button (5) or cancel the process with the
<Cancel>button (6).
A message (7), that the test print-job is loaded pops up.
Confirm the message with the <OK> button (5). The job is now loaded and ready for
to be printed.
7.5.2
Product counter
For the production counter options select the menu item <Product Counter> (2) in the
<Extra> drop down menu (1). Select an option from the submenu.
The following options are available:
Stop after x Products
Reset all Job counters
Figure 84
Open product counter dialog box
3
4 4
3
5
6
7
1 – Drop down menu <Extra>
2 – Menu item <Product Counter>
3 – Option <Stop after x Products>
4 – Open <Product Counter Settings>
Release 2.02
Job Editor
Product Counter Settings
Delete extern text memory
1
5 – Option <2. product counter>
6 – Option <Reset all Job counters>
7 – Option <Delete ExternText memory>
2. Product Counter
2
JET3 Series
Group 8