Insert Date- And Time Specifications - Leibinger JET3 Series Operating Manual

Page 308
Example 2:
The day of the production is: 31 March 2012
The expiry date shall be: 15 months
The regular result of the final date would be the 31
day not exists, the printer will print 01. July 2013. In that case 1 day is missing in June.

8.7.2.1 Insert date- and time specifications

Example: To an already existing text object „A" the current date should be added and
printed and to an existing text object „V" the expiry date as a result of the set
expiry time should be added and printed.
Each date should be formatted dd/mm/yyyy (Day/Month/Year) and it should be
displayed with left-hand zeros (e.g. 01/01/2014). The print should be a two-line
print whereby the "A" and the current date should be printed in the first line and
the "V" and the expiry date in the second line.
The set expiry time should be 15 days.
Approach (part 1) refers to Figure 166
Point 1
 Press the menu item <Insert> (1) and in the drop down menu select the menu item
<Date/Time> (2) or the appropriate direct button (3)
Point 2
 The dialog box <Global Settings (Date/Time)> is faded in and it shows the first tab
<Global Settings>. You can make the requested settings for the font parameters and
display options on this tab.
You will find further information in the chapter 8.4 Object settings
Release 2.02
Job Editor
INFORMATION
st June 2013. Due to the fact that this
Group 8
JET3 Series