Group 8
14. With the next <PrintGo> signal the fifth print job of the job list will be printed. There
no repetitions defined, therefore there will be a total of one printout. The <PrintGo
delay> for each printed job is 30 mm (13).
15. The task is finished.
Basic rules for the job list type <Batch Job>:
Each print job is managed separately.
A <PrintGo> signal is required for each printout and each repetition.
A single print job of the <Batch Job> job list can be edited directly in the joblist
editor. A click on the <Job edit> button will open the currently selected print job
in the <Job Editor>. After changes are saved in the <job editor> leave the <Job
Editor> with the <Close> in order to return to the joblist editor.
<PrintGo distance>, <PrintGo repetition> and the option for <endless> printout
are not available for <Batch Job> job lists. All settings regarding these parameters
which were made within the print jobs will be ignored.
A <PrintGo delay> can be defined within each print job separately.
The WYSIWYG preview of the main window always shows the print job that will
be printed with the next <PrintGo> signal (14).
JET3 Series
Job Editor
Page 111
Release 2.02