Leibinger JET3 Series Operating Manual page 276

Page 274
Picture 15 shows the function diagram of the example.
After 32 meters the printout stops for e.g. print head cleaning. Nevertheless
the Printer is still receiving PrintGo signals. Because of the <Counter
Increment> setting with PrintGo (see picture 3) these signals can be used
to keep the counter updated.
Therfore the counter always has the current meter number no matter whether
there are printouts or not. So after the work on the print head the printout can
be resumed with the correct meter number.
Picture 15 – Example function diagram
Release 2.02
Job Editor Group 8
JET3 Series