Start-Up Commissioning; Remove Transportation Safety Devices - Step 1 - Leibinger JET3 Series Operating Manual

Page 44

5.4 Start-up Commissioning

For a safe transport some hydraulic components are supplied with transportation protection
(cable ties) and the reservoir tanks are evacuated. The following steps have to be carried
out before the initial operation
 Remove the transportation protection (cable ties) (Step 1)
 Fill the reservoir tank (Step 2)
 Carry out the function <Filling Routine> (Step 3)

5.4.1 Remove transportation safety devices - Step 1

The pumps and valves of the hydraulic system are secured with cable ties. These have to be
absolutely removed.
Proceeding:
 Dismantle the backplane of the hydraulic cabinet (1) by loosing the fixing screws (2).
The cable tie at the main filter (3) should not be removed!
 Remove the transportation protection (cable ties).
 Now attach the backplane of the hydraulic cabinet again with the according fixing screws.
Release 2.02
Transport/Start up
ATTENTION
Group 5
JET3 Series