Setting Of The External Print Head Ventilation -Optional Equipment; Figure 12 - Setting Of The Pressure Regulator - Leibinger JET3 Series Operating Manual
Hide thumbs
Also See for JET3 Series:
- Operating manual (378 pages) ,
- User manual (233 pages) ,
- Service manual (6 pages)
Table of Contents
Advertisement
Page 52
5.4.4 Setting of the external print head ventilation -optional equipment
If the high performance printer is equipped with a printhead ventilation system (option) the
seeting of the pressure has to be adjusted befor commissioning the printer.
Proceeding
Turn the adjusting knob (2) of the pressure regulator valve (1), until the necessary pressure
of 1.4 bar is reached.
Figure 12
Setting the pressure regulator
Setting the pressure regulator (external head ventilation)
Set point: 1.4 bar
1 – Pressure regulator valve
2 – Adjusting knob
Supplementary information for the assembly and function can be found in
the chapter
6.7.1 External head print ventilation - assembly and function
Release 2.02
Transport/Start up
1
2
3 – Indicating label
4 – Manometer
INFORMATION
Group 5
3
4
JET3 Series
Advertisement
Table of Contents
