Job Settings; Figure 134 Job Settings Dialog Box - Available Tabs - Leibinger JET3 Series Operating Manual
Hide thumbs
Also See for JET3 Series:
- Operating manual (378 pages) ,
- User manual (233 pages) ,
- Service manual (6 pages)
Table of Contents
Advertisement
Group 8
8.5
Job settings
The dialog box <Job settings> is grouped in 4 tabs. The 4 groups are:
Printstyle
This tabs provides all parameters regarding the look and the size of the printout
Print parameter
This tab provides all parameters regarding the positioning of the printout and the evaluation of
sensors.
Encoder parameter
This tab provides all parameters regarding the speed and direction of the printout whereby the
speed/direction measurement can be done with an external encoder, a speed defined
internally or by the evaluation of external sensors.
Date change parameter
This tab provides the option of defining a date offset.
Figure 134
Job settings dialog box – Available tabs
You will find an overview and further information regarding the available
parameters in chapter 8.2.5 Job settings dialog box - Overview
JET3 Series
Job Editor
INFORMATION
Page 255
Release 2.02
Advertisement
Table of Contents
