Edit Tools; Figure 95 Graphic Editor (Edit Tools) - Leibinger JET3 Series Operating Manual

Page 202
Start the graphic editor dialog box with the option <Editors> - <Graphic-Editor> (2) and
(3).
The graphic editor provides a menu bar with the following entries:
 File
<Graphics> are created and edited on the drawing area (6).
The <Coordinates> (7) indicate the current position on the drawing area.
The status bar for the current tool or command (8) indicates which tool is selected and
what is expected as next step.
The <Cancel> button (9) closes the dialog box. If the inputs have been not saved yet, a
confirmation prompt is displayed.
With the <OK> button (10) the graphic editor will be closed without further notice and all
changes will be aborted.

7.5.6.1 Edit tools

The drop-down menu <Edit> provides several tools.
Note: The function of the tools corresponds to Windows™-standard procedures.
Figure 95 Graphic editor (Edit tools)
1
1 – Drop-down- menu <Edit>
2 – Edit tool <cut>
Release 2.02
Job Editor
 Edit
2
3
4
5
3 – Edit tool <copy>
4 – Edit tool <paste>
 Function
5 – Edit tool <delete>
Group 8
 View
JET3 Series