Figure 158 - Sensor Distance - Determination Of Stroke Positions With Two Sensors - Leibinger JET3 Series Operating Manual

Page 284
Figure 158 Sensor distance – speed and positioning determination with two sensors
3
4
A
1 – Both sensors at the same height
2 – Distance between sensors <A>
3 – Maximum <Sensor distance>
4 – The Distance A (between the 2 sensors)
has to be smaller than Distance B
(between the products)
5 – Wrong setup – more than one product
between the 2 sensors
Release 2.02
Job Editor
1
2
7 8
6 – Input field <Sensor distance>
7 – Sensor 1 – Start measurement –
8 – Sensor 2 – Stop measurement –
9 – Input field <intern Speed>
Wrong setup!
5
9
6
Connected to X5.5.
Connected to X5.4. This sensors
works also as PrintGo sensor
Group 8
JET3 Series