Page 324
Carry out the inputs („002" and „003") accordingly for the further shift codes.
Press the button <OK> (14) to take over the input and to close the dialog box or press
the button <Cancel> (13) to leave the dialog box without saving the inputs to take
over the input and to close the dialog box.
In the dialog box <Jobeditor> (16) the fix text followed by the applied shift code are
displayed.
Note:
Displayed is the shift code which is currently valid ( as in the example the night
shift „003").
8.7.4.3 Remove shift times
Shift times that are no longer needed can be removed.
Proceeding:
Mark the shift time to be deleted (1) on the list of shift codes (2).
Press the button <Remove> (3). The shift time is deleted.
Figure 174
Print elements –Remove shift code)
2
1 – Marked shift time
Release 2.02
Job Editor
1
2 – List of shift codes
3
3 – Button <Remove>
Group 8
JET3 Series