Load Job To Print; Figure 124 Job Editor (Load Job To Print) - Leibinger JET3 Series Operating Manual

Group 8

8.3.2 Load job to print

With the option <Load Job to print> the job which is currently opened in the job editor
can be loaded directly for printing.
Figure 124 Job editor (Load job to print)
1
1 – Drop down menu <Job>
2 – Option <Load Job to print >
3 – Message <Print job change>
4 – <OK> Button
5 – <Cancel> Button
Proceeding:
 Press the button <Job> (1) and the option <Load job to print> (2).
 A confirmation prompt (3) pops up.
 Confirm the change by pressing on the <OK> button (4) or cancel the process with
the button <Cancel> (5).
 The job in the job editor is now loaded for printing. Attention! If there already
occurred a <PrintGo> signal for the original job, the Printer starts immediately the
printing process.
JET3 Series
2
7
Job Editor
4
6 – Button <Close>
7 – Option <Close Editor>
8 – Message <Reload original job>
9 – Button <OK>
Page 239
3
5
6
8
9
Release 2.02