Carry Out Replacements; Counter - Leibinger JET3 Series Operating Manual
Hide thumbs
Also See for JET3 Series:
- Operating manual (378 pages) ,
- User manual (233 pages) ,
- Service manual (6 pages)
Table of Contents
Advertisement
Group 8
8.7.2.2 Carry out replacements
Further more accordant substitutions (numbers, letters or designations) for the date- and
time values can be generated on the tab <Replacements> to get an operating-specific
display or coding of the specifications.
You will find further information regarding the execution of substitutions in
the chapter 8.8 Replacements
8.7.3 Counter
Provides bonding of individual programmable counters as well as definition of counter
parameters, font parameters and display options.
Further more accordant replacements (number or letters) can be generated to get a
operating specific display or coding of the specifications.
Attention! Leaving a job, the counter states of job counters are usually
not saved, that means if you re/open the job the counter readings will be
set to the start value. If the print should be continued with the last counter
readings you have to define the respective counter as <Global counter>
You will find further information also in chapter 8.7.3.1.13 Global counter
JET3 Series
Job Editor
INFORMATION
ATTENTION
INFORMATION
Page 313
Release 2.02
Advertisement
Table of Contents
