Other Settings And Functions; Carry Out Hardware Reset - Leibinger JET2NEO Manual

Page 74
Control elements:
Serve for saving settings or exiting menus. The following commands are assigned to the
elements depending on the menu or function:

6.7 Other settings and functions

6.7.1 Carry out Hardware Reset

Unplug and plug in again the mains plug:
This will reset the printer's electronic in case of malfunctions. The nozzle seal has to be
closed during a hardware reset.
The hardware reset is performed by unplugging the mains plug and pluggin it in again.
Abbildung 29
Hardware reset by unplugging and plugging in again (Hardware Reset)
Release R1.12 en
Operation – Elements and procedures
Control elements
(Buttons)


Assignment/Occupancy
Cancel
Close
No
Overtake
Carry out
OK/Yes
Group 6
JET2 neo