Page 80
6.5.4
Switch off device
Figure 25
Switch-off procedure
1
2
1 – <Off> Button
2 – Confirmation prompt
3 – <Yes> Button
Proceeding:
Press the button <Off> (1).
A confirmation prompt (2), pops up.
Confirm the shut down of the device by pressing the button <Yes> (3) or cancel the
process with the button <No> (4) ab.
Now the device is turned off. During the shut down the message <Shutdown> (5) is
displayed.
Comment:
If the nozzle is still open during the turn-off procedure, it will be closed automatically.
Turning off the device is only possible after a print stop.
After turning off you have to wait approx. 5 sec. until the device can
be turned on again.
Release 2.02
Job Editor
3
4
INFORMATION
5
4 – <No> Button
5 – <Shutdown> message box
Group 8
JET3 Series