Create New Job List - Leibinger JET3 Series Operating Manual

Page 94

7.2.5 Create new job list

All numbers in the following description refer to figure 34
The menu item <Create new job list> offers three options:
 Extern Job select (3)
 Batch job (12)
 Job organisator (19)
Each option represents a special type of job list. The dialog boxes of all 3 options have
all the same <Menu bar> (2) which will be described separately. Each of the 3 types of
job lists has its own dialog box. Changes made in these dialog boxes may either be
confirmed with the <OK> button (10) or discarded with the <Cancel> button (11). There
are examples for all types of job lists at the end of this chapter.
Extern Job select (3)
Up to 1023 print jobs can be listed in an <Extern Jobselect> list (3). A job is added either
with the <Import Job> button (5) or with the respective option of the <Edit> drop-down
menu of the menu bar (2). Both will open an <Open file> dialog box. The print job will be
added at the current cursor position. With the <Delete Job> button (6) the currently
marked job will be removed from the list display (9). The job list shows <Input No> (8)
and <Job> name (4). The <Input No> (7) represents the address of the print job. The
addressing is done in binary form through the digital inputs of connector X4. Details about
connector X4 can be found in the addendum. With each <PrintGo> signal the currently
addressed print job will be printed.
Batch Job (12)
Up to 1023 print jobs can be listed in an <Batch Job> job list (12). A job is added either
with the <Import Job> button (5) or with the respective option of the <Edit> drop-down
menu of the menu bar (2). Both will open an <Open file> dialog box. A print job will be
added below the current cursor position. With the <Delete Job> button (6) the currently
marked job will be removed from the list. The job list shows the <No.> (15), the number
of <Repetitions> (14) and the name of the <Job> (4). The number of <Repetitions> (13)
for a selected print job is defined and indicated through a display field with Numeric
keypad and/or arrow keys. The print jobs plus optional repetitions will be printed in the
order of the job list display (9). The job list (9) can either be processed in a loop (17) or
the print-out can be stopped after the last job on the list was printed (16).
Release 2.02
Job Editor Group 8
JET3 Series