Group 8
7.4.7 Service interval
The option <Service Interval> (2) opens the dialog box "Service" (3). The dialog box
shows the following parameters:
The date of the last inspection (4)
The total amount of operation hours (5)
Operation hours since the last inspection (6)
Total number of prints counter (7)
Total number of drops counter (7). The accurancy of the drop counter is +/- 100 drops.
The button <OK> (8) closes the window.
Figure 80
Service interval dialog box
3
4
5
6
7
8
9
1 – Drop-down menu <ServiceFunctions>
2 – Option <Service Interval>
3 – Dialog box <Service>
4 – <Date of last service>
5 – <Working hour meter>
JET3 Series
Job Editor
6 – <Working hours since last service>
7 – <Total print counter>
8 – <Total drop counte>
9 – <OK> Button
Page 177
1
2
Release 2.02