Figure 85 Stop After X Products - Pre-Defined Print Stop - Leibinger JET3 Series Operating Manual

Page 184
Figure 85 Stop after x products - pre-defined print stop
Select <Stop after x Products / 1 or 2 product counters
Basically this function works the same way no matter whether there are one or two
product counters defined. A second product counter does not have any effect on this
function. The only difference is the look of the status field.
The dialog box of the <Stop after x Products> function is a submenu of the <Product
counter> menu.
The parameter can either be set with the virtual keyboard or with the arrow keys.
The settings are
confirmed with the
<Set> button.
1 – <Product Counter> Options
2 – <Stop after x Products> Option
3 – Dialog box <Stop at xProducts>
4 – Arrow keys
5 – Input field
Release 2.02
Job Editor
2
3
5
6
8
9
Red frame as <Stop after x
Product setting> indicator
With one production counter
Depending on whether there is a second production counter
defined or not the status field looks different.
3
4
5
7
8
Red frame as
<Stop after x Product
setting> indicator
With two production counters
6 – Numeric keypad
7 – <Set> Button
8 – <Cancel> Button
9 – Sta. field <Prod. Counter> 1 counter
10 – Sta. field <Prod. Counter> 2 counter
Group 8
1
10
JET3 Series