Group 10
10 Setting-up/Maintenance
10.1 Refilling of ink and solvent –TAG handling
10.1.1 Safety information
Danger of explosion!
Before filling the device with the consumables, measures for the
The operator can carry out a discharge either by the direct touching
of the PRINTER-cabinet or by standing with the appropriate ESD-
shoes on an grounded surface!
Dangerous material in the machine!
Danger of serious damage through burns, skin irriation and poisoning!
Protective equipment is necessary! Read the safety data sheets and
The storage containers for ink and solvent are installed beneath the cover flap of the refill
unit (see illustration below).
The two reservoir tanks are monitored by level sensors. They are always unpressurized
and can be opened in every device condition – also during the production.
The reservoir tanks and the sealing cap are color-coded and labelled to avoid any
mistakes in filling. Additionally the sealing caps are marked with the ink-no. or solvent-no.
which are admissible for the device.
JET3 Series
Setting-up/Maintenance
WARNING
electrostatic discharge have to be made!
WARNING
the personal protective equipment rules and regulations!
Page 361
Release 2.02