Contact Details - Leibinger JET3 Series Operating Manual

Group 8

7.3.1.8 Contact details

The tab <Contact details> (2) provides an input field (3) for storing contact details. These
contact details are displayed in the Information dialog box (4) on page 1 (5). If this field
is left empty (3) the respective field in the Information dialog box will also stay empty (5).
Proceeding:
1. From the <Basic settings> dialog box (1): select the <Contact details> (2) tab.
2. Enter the contact details in the input field (3).
Basic rules for entering contact details
A click in the input field (3) will open a software keyboard (6). All inputs will be displayed
centered (7). The width of the input field defines the length of the input per line (8). If a
line is filled completely the next input will cause a return (9). There is a maximum of 8
lines available (10).
A return can also be created with the keyboard's return key (11). Using the return key it is
also possible to create empty lines (12).
Important
Empty lines are not visible in the input field.
If during input the return key of the software keyboard shows no reaction there
may be already 8 lines created. This can be checked by using the arrow-down
or arrow-up key of the keyboard.
Inputs have to be confirmed by the <Accept> button (13).
If the keyboard covers the input field it can be moved by drag'n drop (14).
JET3 Series
Job Editor Page 137
Release 2.02