Leibinger JET3 Series Operating Manual page 252

Page 250
The two „object groups" in the Printer job editor
"Length specification group"
Counter object for the length
specifications.
Text object for the unit [m].
No specific settings needed.
Counter parameters
Counter parameters
Printout of lenghts specifications
1.
2.
3.
Release 2.02
The lenghths specifications are
printed with 3 digits, left-hand
zeros and step width is 1
In this example: 1 meter.
The count will start at 1 meter
and it will stop after 999 meter.
The current counter value is
printed after each PrintGo
signal.
Job Editor
Picture 4 – Printer job editor:
Picture 5 – Counter settings for
Group 8
Objects for the length
specifications printout
the length
specifications printout
JET3 Series