Group 10
10.1.2 TAG-reader
The TAG-reader of the Leibinger Printer printer guarantees a faultless function with
regard to the correct usage of ink and solvent.
The TAG-reader makes sure that only ink and solvent is used that is approved by
LEIBINGER.
With each refill the TAG of the ink or solvent bottle is checked for a valid TAG. If no valid
TAG is activated during the refill the printer will shut down to stand-by mode. Each TAG
can be activated only once.
Information
A TAG is electronically readable label which holds coded information. The
information is readable with TAG reader. The coded information is read out
wireless by radio.
Figure 186
1 – Reservoir tank „Ink"
2 – Reservoir tank „Solvent"
3 – TAG reader
10.1.2.1 Execution of the TAG-activation and refilling
The reservoir tanks mustn't be refilled without respective messages from the
printer.
A too early refilling bears the risk of overfilling and spillage of ink or solvent!
JET3 Series
Setting-up/Maintenance
1
2
3
Attention
4 – Refilling bottle
5 – TAG area on the refill bottle
Page 363
4
5
Release 2.02