Switch On Device; Switching On Without Password Protection - Leibinger JET3 Series Operating Manual

Page 76

6.5.3 Switch on device

6.5.3.1 Switching on without password protection

Proceeding:
 Touch the dark Touch-Display (1) for at least 2 seconds.
 The device is turned on and the main window (2) is displayed with the message
<Initialization> (3).
 After the initialization the device starts with the bleeding of the system automatically.
 During the process the message <Bleeding> (4) is displayed. The bleeding takes
between 1 – 5 min. The process can be canceled by pressing the button <Cancel>
(5).
Note:
For starting the device the job which has been used at last will be loaded
automatically.
Release 2.02
Job Editor Group 8
JET3 Series