Figure 58 Remote Control - Connection Scheme - Leibinger JET3 Series Operating Manual
Hide thumbs
Also See for JET3 Series:
- Operating manual (378 pages) ,
- User manual (233 pages) ,
- Service manual (6 pages)
Table of Contents
Advertisement
Group 8
Information
Please contact your system administrator in order to implement the
LEIBINGER Printer printer in a local network. LEIBINGER cannot be held
liable for any malfunctions caused by inappropriate network settings!
The software suggested are to be understood as examples.
The suggested software are no LEIBINGER products nor it will be
supported by LEIBINGER.
Figure 58
Remote Control – Connection scheme
Tablet WiFi connection
Connected to router by WiFi.
Using the SSID and password of the
WiFi router
VNC Client software is required
Notebook WiFi connection
Connected to router by WiFi. Using the
SSID and password of the WiFi router
VNC Client software is required
Desktop PC cable connection
Connected to router by cable
VNC Client software is required
Example:
Desktop PC IP-Address: 192.168.1.5
The address has to be within the address space of the router.
JET3 Series
Job Editor
Example:
Router IP-Address:
192.168.1.1
LEIBINGER Printer
A cable for the M12D coded socket of the
Printer is required.
Example:
Printer IP-Address:
192.168.1.10
Subnet mask:
255.255.0.0
Page 143
Release 2.02
Advertisement
Table of Contents
