Print Style - Font Parameters; Print Height; Figure 135 - Printstyle Dialog Box; Figure 136 - Font Parameters - Print Height - Leibinger JET3 Series Operating Manual

Page 256

8.5.1 Print style - Font parameters

The <Printstyle> provides parameters for the design of the printout.
The following parameters are available:
 Print height
 Font width (Stroke distance)
Figure 135 Printstyle tab
2
1 – Print height
2 –Printmode

8.5.1.1 Print height

The setting defines the print height. The print height is determined by the vertical drop
distance. The value can set between 1 – 100%.
The value set is displayed in the respective input field.
As higher the entered value, as larger the distance between the single dots.
Figure 136 Font parameter values (Print height)
Release 2.02
1
Job Editor
 Orientation
 Print mode
3 –Orientation
4 –Font width
Group 8
3
4
JET3 Series