Leibinger JET3 Series Operating Manual page 70

Page 68
 Direct buttons (3): Several menus or submenus of the printer can be accessed with these
shortcuts. The following list show the default direct buttons:
Pos. Button
1.
2.
4.
5.
6.
7.
9.
10.
There are several more <Direct buttons> (shortcuts) available. Please see chapter 7.3.4
Menu Shortcuts for details about the configuration of these shortcuts.
 WYSIWYG display and print preview (4): The preview shows the currently loaded print
job in "What you see is what you get" mode.
 <Printing speed> indicator or <Products per minute> indicator(5): this indicator
shows either the current printing speed or how many products are currently printed per
minute. Depending on the selected adjustments in the basic settings the speed is
displayed as. m/min or inch/min. The products per minutes are calculated on the basis of
2-second measuring intervals during which the PrintGo signals are counted. The
displayed speed is an average value of all values calculated within the last 60 seconds.
Therefore it may take up to 1 minute until a stable value is reached. The calculation is
restarted with each Print Start command. The dimensions of the measurement are
changed by a click on the icon. The standard display has the dimensions meter/min or
ft per minute depending on the <Basic Settings> for dimensions. This setting can be
changed in the <Settings> - <Basic Settings> - <Factory settings>
 <Time/Date> indicator (6): Shows the current time and date. The <Time/Date> is set in
the dialog box <Settings> - <Basic settings> - <Date/Time>
 <Off/Shut down> button (7): A click on this button will shut down the printer. Please see
chapter 6.5.4 Switch off device
Release 2.02
Job Editor
Function-/menu designation
Create new job
Edit current job
Open job to print
Test-print function
Hydraulic/Printhead test and
maintenance menu
Data Logging
Explorer
Info
Comment
Starts job editor with a new print
job
Starts job editor with the current
print job.
<Open file> dialog box pops up
Loads the <Test print> job.
See chapter 6.4 User interface
and printer operation for details
The <Hydraulic/Printhead>
dialog box pops up.
The <Data logging> dialog box
pops up.
The <Explorer> dialog box pops
up.
System information menu pops
up.
Group 8
JET3 Series